Product ParametersDiameter(mm)Inner hole diameter(mm)Bit tool thickness(mm)Bit tool height(mm)Tooth number350503.2/3.41524400503.61528450503.81232500504.21236600504.81242700505.21046800506.01050Operating Guide1.Be assured that the blade is undamaged before using. Prohibitted to use in case of any damage.2.During assembling,the inaccuracy between the machine axle and the center of blade should be less than 0.1mm.3.When cutting,side pressure and curve cutting should be avoided. Plain cutting in avoid of danger occurred.4.When dry cutting, don't cut for a long consecutive time to assure the service life and good effect. When wet cutting,please keep wet cooling and assure that there is no leakage of electricity.5.The cutting machine should be covered with safety shield.The operator should be with protective supplies such as safety clothes glasses, labor safeguard shoes etc.6.The expert suggests: The machine should idle running for several minutes. Confirm that there is no shaking or skipping, try on grinding wheel or refractory bricks for several minutes, then start working. This can achieve the best cutting effect based on the previous procedures. If the blade is blunt, use carborundum to sharpen it.
http://www.cl-diamondtools.com