dry powder filler , dry powder filling equipment, fire extinguisher dry powder filler GFM16-1 stainless steel dry powder filling machine is especially suitable for the filling, production and maintenance of dry powder extinguisher and also suitable for filling various powder products. So it is ideal equipment in the powder filling industry.
Technical parameters of stainless steel dry powder filler
Volume: 870×590×1320mm
Weight: 110kg
Voltage: AC 220V/380V
Power: 1.1KW
Filling rate: 5kg/min
Filling residue:1kg≤0.04
Maintenance of stainless steel powder filling machine
1. An appropriate amount of 20# lubricant should be filled into the driving parts of the elevator before each use.
2. When the powder suction pipe is working, it should not be inserted too deeply, or blockage of pipe may occur.
3. No dry powder with serious corrosion and above-norm moisture content can be used against damage of equipment.
4. After each use, start the machine and push the rob of direction valve inward for several times so that the residual dust on the filter can be cleared away in addition to other parts of the equipment.
5. After a service life of 500 hours, check if the filer is blocked. If so, clean it up or replace it.